Blurred car lights can occur in any part from the front, the car head lamp, turn signal lights and taillights. Mika gloomy light, can reduce power beam (quality of lighting) less than the maximum, so that driving becomes more difficult
|Tips How to Care Car Head Lamp|
Mika blurred lights are caused by: exposed to water, moisture intruding, blockage of the vent, intruding dust, often exposed to the sun, a large lamp power usage or age factor mica lamp.
How to clean mica headlights are blurred by rubbing mica lamp, with cleaning fluid mica is widely available on the market (car maintenance workshop), in addition to mica lamp becomes translucent light scratches on mica lamps will also disappear.
After mica 0f car lights is clear, to prevent blurry lights, here are tips:
1. use the appropriate power, using light with great power can make quickly mica rapid yellowing or brittle, this is due to automotive manufacturers actually have to measure the durability of mica lamp against the lights, and adjust it to standards
2. note rubber bulb cover, rubber bulb cover is sometimes torn / brittle, if it occurs immediately replace with a new one because the rubber bulb cover brittle / tearing can cause the entry of dust or other debris on the house lights
3. note the mica cover seals, mica cover seals is very easy to see because it is outside the house lights. If there is a tear sil / perforated / brittle it will be very slaves for water and dust from entering the house lights, replace or fix this sil
4. keep the cleanliness of the hood, especially for the front of the engine, the engine can make dirty dust / dirt from entering the engine room past the bulb, if necessary, use insulation to close holes that may be the way in the dust from the engine room to the house lights.